Available Paper Stock
The paper types that can be used with this machine are shown in the following table. Icons indicating the type of paper loaded in each paper drawer can be displayed on the paper selection screen if you store that information in the machine beforehand. (See "Registering the Paper Size and Type for a Paper Source.")
: Available -: Unavailable
Paper Type
Paper Source
Paper Drawer 1, 2, 3, 4
Multi-Purpose Tray
Plain 1
(64 to 80 g/m2)
Plain 2
(81 to 90 g/m2)
Recycled
(64 to 80 g/m2)
Colour
(64 to 90 g/m2) 
Heavy 1
(91 to 105 g/m2)
Heavy 2
(106 to 128 g/m2)
-
Transparency
(151 to 181 g/m2)*1
-
Pre-punched
(75 to 80 g/m2)
Bond
(75 to 90 g/m2)
-
Labels
(151 to 181 g/m2)
-
Envelope
*2
*1 Use only A4 transparencies made especially for this machine.
*2 If the Envelope Cassette-E1 is attached to to the machine, envelopes can be loaded.
: Available -: Unavailable
: Available -: Unavailable
Paper Size
Width x Length
Paper Source
Paper Drawer 1, 2, 3, 4
Multi-Purpose Tray
A4
210 mm x 297 mm
A5
148 mm x 210 mm
Envelope
Yougatanaga 3
120 mm x 235 mm
-
Nagagata 3
120 mm x 235 mm
-
COM10 No.10
104.7 mm x 241.3 mm
*1
Monarch
98.4 mm x 190.5 mm
*1
DL
110 mm x 220 mm
*1
ISO-C5
162 mm x 229 mm
*1
Custom Size
139.7 mm x 210 mm to 216 mm x 355.6 mm
*2
139.7 mm x 139.7 mm to 216 mm x 209.9 mm
-
99 mm x 139.7 mm to 139.6 mm x 355.6 mm
-
*1 If the Envelope Cassette-E1 is attached to the machine, envelopes can be loaded.
*2 You can use only Custom Size paper registered in [Paper Type Management Settings] under [Preferences].
NOTE
For instructions on loading paper, see the following sections:
Loading Paper into a Paper Drawer for paper drawers
Loading Paper into the Multi-Purpose Tray for multi-purpose tray
Paper Drawers 2, 3, and 4 are optional products.
Chlorine-free paper can be used with this machine.
Storing Printouts
When handling or storing paper printed by this machine, be careful of the following points.
How to Store Printouts
Store paper on a flat surface.
Avoid storing printouts in folders made of PVC material, as this may cause the toner to melt and stick to the PVC material. Toner may peel when printouts are folded or creased.
Store printouts in the condition where they are not folded or creased as toner may peel.
Put printouts in a binder when storing for a long period of time (two years or longer).
Printouts may discolor when stored for a long period of time.
Avoid storing printouts in a location subject to high temperatures.
Precautions When Sticking Printouts with Adhesive
Be sure to use insoluble adhesive.
Test the adhesive on an unneeded printout before using.
Before stacking printouts that stuck with adhesive, check that the adhesive completely dried.
» Basic Operations » Available Paper Stock
0ALK-025