Feeder - Canon imageRUNNER ADVANCE 500i/400i e-Manual

Feeder

You should use the feeder when you want to copy several originals at the same time. Place the originals into the feeder and press

(Start). The machine automatically feeds the originals to the platen glass and scans them. Two-sided originals can also be automatically turned over and scanned as two-sided documents.

The following types of originals can be loaded in the feeder:

Weight:

One-sided scanning: 42 to 128 g/m2

Two-sided scanning: 50 to 128 g/m2

Original size: A4 and A5

Tray Capacity: 100 sheets of paper (80 g/m2)

IMPORTANT
Thin originals may become creased, if used in a high temperature or high humidity environment. Do not place the following types of originals into the feeder: Originals with tears, five or more binding holes, or cutouts Severely curled originals or originals with sharp folds Wrinkled originals Stapled originals or originals with paper clips Tabbed originals Originals with adhesive tape or glue Originals that are taped together Carbon backed paper or other originals which may not feed smoothly Transparencies and other highly transparent originals Always smooth out any folds in your originals before placing them into the feeder.

IMPORTANT

Thin originals may become creased, if used in a high temperature or high humidity environment.

Do not place the following types of originals into the feeder:

Originals with tears, five or more binding holes, or cutouts

Severely curled originals or originals with sharp folds

Wrinkled originals

Stapled originals or originals with paper clips

Tabbed originals

Originals with adhesive tape or glue

Originals that are taped together

Carbon backed paper or other originals which may not feed smoothly

Transparencies and other highly transparent originals

Always smooth out any folds in your originals before placing them into the feeder.

Adjust the slide guides to fit the size of your originals.

Neatly place your originals with the side to be copied face up into the original supply tray.

* Original Supply Tray

If any dirt on the original scanning area is detected when the originals are placed in the feeder, the screen prompting you to clean the scanning area appears. Even though streaks may appear on the copies, you can continue to scan your documents by pressing [Close]. For instructions on cleaning the original scanning area, see "Manual Feeder Cleaning."

CAUTION
Do not insert your hands in the gap in the original supply tray, as doing so may cause injury.

IMPORTANT
Do not drop clips or other objects into the gap in the original supply tray. Do not add or remove originals while they are being scanned. When scanning is complete, remove the originals from the original output area to avoid paper jams. Do not place items in the original output area, as doing so may cause damage to your originals.

NOTE
The scanned originals are output to the original output area in the order they are fed into the feeder.

IMPORTANT
Limit repeated feeding to a maximum of 30 times (this number varies, depending on the type and quality of the original). If the same original is fed through the feeder repeatedly, the original may fold or become creased, and make feeding impossible. If the feed rollers are dirty from scanning originals written in pencil, perform the feeder cleaning procedure. (See "Manual Feeder Cleaning.")